Monarch Instrument DC 2000 - Manual (Page 19)

Page 2-1
Chapter 2 Installation and Wiring
CHAPTER 2
This chapter provides information and procedures on installing and wiring the Recorder. Included are handling
procedures, installation and wiring specifications, and instructions for both standard and optional equipment.
2.1 Equipment Handling
2.1.1 Initial Inspection
Exercise care when unpacking the instrument from the shipping carton. The instrument is packed in a
shock-proof foam retainer to prevent damage during normal transit. If damage to the shipping carton is evident,
ask the carrier’s representative to be present when the instrument is unpacked.
2.1.2 Unpacking Procedure
To unpack your Recorder, first remove the foam retainer and instrument from the shipping carton. Then,
carefully remove the instrument from the foam retainer.
2.1.3 Detected Damage
If damage is detected after unpacking the instrument, re-pack the instrument and return it to the factory as
described in the following section.
2.1.4 Equipment Return
Before returning a damaged or malfunctioning instrument to the factory for repairs, contact the sales organiza-
tion from which you purchased the instrument. A Return Merchandise Authorization number must be obtained
from the factory before returning an instrument for any reason.
2.1.5 Storage
For prolonged storage before installation, re-pack the Recorder in the shipping container. Cushion the
Recorder with foam molding or an equivalent and store in a cool, dry area. We do not recommend storage of
the Recorder for more than one year
. If longer storage time is required, contact the factory for additional
storage information.