Monarch Instrument DC 2000 - Manual (Page 151)

Appendix D– Configuring the Totalizer
Page 3 of 5
You will now be back at the menu starting with
Point tag
.
Use the up/down arrow keys to select
Basepoint
and touch
ENTER
. You will be prompted with
base pt?
. Use the up/
down arrow keys to select the channel from which the
totalizer will derive its information. For this example, select
channel
1
and touch
ENTER.
You should now be back at the
Point tag
menu. Use the
up/down arrow keys to select
Flowrate
and touch
ENTER
.
You will again be back at the
Point tag
menu. Use the
up/down arrow keys to select
Eng units
and touch
ENTER.
11.
12.
13.
14.
The menu displaying the various flow rates should appear.
Use the up/down arrow keys to select the rate that matches
that of your flow meter. In this example our flow meter on
channel one measures millions of gallons per day, so select
flow= /day
and touch
ENTER
. You will have to touch
EXIT
to leave this menu.
You will be prompted with
places>?
(0, 1, 2, 3, 4 or 5).
Using the up/down arrows you may select the appropriate
number of decimal places. For this example select
1
and
touch
ENTER
.
10.