Monarch Instrument DC 2000 - Manual (Page 144)

Appendix C – Configuring a J type T/C input for a 100 - 750°C range
Page 2 of 5
The menu containing types of inputs should now be
displayed. Use the up/down arrow keys to select
T/c
and
then touch
ENTER
.
An alphanumerickeypad will be displayed. This is where
you enter a word or phrase (up to 10 characters*) that
describes this particular point. There are multiple pages of
letter, numbers and symbols that can be used. Use the
PAGE, PAGEBK
and
SHIFT
keys to access the differenct
characters. For this example enter
J t/c
and touch
ENTER
.
* Only 8 characters will be displayed on the screen although
all ten will be recorded and can be displayed using the
Companion Software .
The menu starting with
Point tag
will appear. Using the up/
down arrow keys select
Point tag
and touch
ENTER
.
The menu displaying thermocouple types should now
appear. For this example use the up/down arrow keys to
select
J t/c
and then touch
ENTER
.
6.
9.
8.
7.
If you are configuring the Recorder for the first time, a menu
having Setup pt , Copy pt and Restore pt will appear. If
you are changing a point that you have already configured,
the menu will have Modify pt and Delete pt . Depending on
which menu appears, use the up/down arrow keys to select
Setup pt or Modify pt and then touch ENTER .
5.