Monarch Instrument DC 2000 - Manual (Page 158)

PACKING INSTRUCTIONS
Instruments that are to be returned to the factory for repairs or credit must be packed according to
the following instructions. The customer is liable for all damages caused by improper packing.
1.
The unit should be packed in a new reinforced box or crate.
2.
There should be at least two inches of resilient packing material (sheets or blocks) on all
six sides of the unit.
3.
Packing material should hold the unit in the center of the shipping box and not allow the
unit to shift inside the shipping box.
4.
The unit should be shipped with all retaining devices in place. Refer to Chapter 2,
Installation and Wiring, for further packing instructions.
5.
Shipping boxes are available from Monarch Instrument for a small charge. Please
consult the Service Department for pricing.