ADS Environmental Services FlowAlert QR 775011 A2 - Manual (Page 122)

5-18 ADS FlowAlert Manual
Editing the Notification Device
The FlowAlert monitor can provide alarm notification through
IntelliServe

systems, email, and cellular phones with text
messaging (SMS) capability. These alarms represent High, High
High, and Low Depth alarms.
The FlowAlert also can check in daily and provide event
notification to an email address and cellular phone. Events concern
low battery voltage, power failure, and float and time errors.
Edit the notification device to setup alarm and/or event notification
in the following way, and click on the OK button when complete:
 Alarm Enable Select this checkbox to activate the options for
configuring alarm notification to an IntelliServe system,
cellular phone, and/or email address.
 IntelliServe Receipient Enter the IP address for the
IntelliServe system you want the FlowAlert monitor to notify
under alarm conditions.
 Port This non-editable field represents the number of the port
through which wireless communication will occur (when
applicable). The current default and only applicable port is
2100.
 Max Entries Enter the number of times within a sample
interval you would like the FlowAlert monitor to attempt to
establish communication following an event.
 Diagnostics Enable Select this checkbox to enable the
FlowAlert monitor to send out event notification to a cellular
phone or email address.
 Check In Enable Select this checkbox to ensure the
FlowAlert monitor checks in daily through an email or text