ADS Environmental Services FlowAlert QR 775011 A2 - Manual (Page 69)

4-1
C H A P T E R 4
Communication
After installing the pressure depth sensor, securing the float
switch(es) in the manhole, and connecting the cables to the monitor,
it is necessary to establish communication with the monitor (through
wireless communication, telemetry, or the direct serial connection)
to activate the monitor. This chapter contains instructions on
establishing a wireless connection or telephone service at the
monitor location for communicating with the monitor remotely and
using the direct serial cable to communicate with the monitor on-
site. It also includes basic information concerning monitor
activation.
Note: Manhole and sewer system work involves confined
space entry and is inherently dangerous. Therefore,
installers and technicians must comply with all federal,
state, and municipal regulations concerning confined space
entry. ADS
® is not responsible for any injuries, damages,
claims, or liability resulting directly or indirectly from the
use of this installation guide or the installation of any ADS
equipment.