ADS Environmental Services FlowAlert QR 775011 A2 - Manual (Page 197)

In-2 ADS FlowAlert Manual
wiring lightning protection to
network interface box, 4-32
wiring to lightning protection
module, 4-30
checking the battery voltage, 7-4
Class A Digital Device
FCC compliance
warning, 1-3
cleaning the float switch, 7-9
cleaning the sensor, 7-9
collecting data from the monitor,
5-37
communication, 2-6, 2-7
disclaimer, 1-2
GPRS, 2-7
installing a wireless antenna in a
pedestal, 4-9
installing a wireless antenna in the
road, 4-3
installing a wireless antenna on a
roof or other protected
structure, 4-16
land line, 2-6, 2-7, 4-22, 4-23
mounting lightning protection
module, 4-25
preparing telephone cable,
4-26
running the telephone cable,
4-23
wiring lightning protection
module to network interface
box, 4-32
wiring telephone cable to
lightning protection module,
4-30
wiring telephone cable to
monitor, 4-28
on-site, 4-35
remote, 4-2, 4-22
setting parameters, 5-20
SIM card installation, 4-17
troubleshooting, 7-16
using the direct connection cable,
4-35
viewing logs, 5-47
wireless, 2-6, 2-7, 4-2
configuring the power savings
parameters, 5-27
getting signal strength, 7-4
SIM card installation, 4-17
configuration, 5-2
creating a monitor location, 5-4
creating an installation table, 5-6
editing the float device, 5-13
editing the notification device,
5-18
editing the pressure device, 5-15
editing the RSSI device, 5-19
selecting devices, 5-11
setting communication parameters,
5-20
setting power saving parameters,
5-27
configuring the monitor, 5-2
creating a monitor location, 5-4
creating an installation table, 5-6
editing the float device, 5-13
editing the notification device,
5-18
editing the pressure device, 5-15
editing the RSSI device, 5-19
selecting devices, 5-11
confirmation, 7-3
connecting to the monitor on-site,
4-35
connectors, 2-7
cleaning and removing moisture,
3-42
monitor, 3-42
D
data collection, 5-37
logs, 5-47
depth
float switch, 2-10
pressure sensor, 2-9
troubleshooting, 7-20