Kontron AT8402 CLI - Manual (Page 125)

AT8402 Quality of Service (QoS) Commands
Page 3 - 13 AT8402 CLI Reference Manual
conform level are specified. The <class-map-name> parameter is the name of an
existing Diffserv class map.
NOTE: This command may only be used after specifying a police command
for the policy-class instance.
Format
conform-color
<class-map-name>
Mode Policy-Class-Map Config
3.4.4 class
This command creates an instance of a class definition within the specified policy for
the purpose of defining treatment of the traffic class through subsequent policy
attribute statements. The
<classname>
is the name of an existing DiffServ class.
NOTE: This command causes the specified policy to create a reference to the
class definition.
NOTE: The CLI mode is changed to Policy-Class-Map Config when this com-
mand is successfully executed.
Format
class
<classname>
Mode Policy-Map Config
3.4.4.1 no class
This command deletes the instance of a particular class and its defined treatment from
the specified policy.
<classname>
is the names of an existing DiffServ class.
NOTE: This command removes the reference to the class definition for the
specified policy.
Format
no class
<classname>
Mode Policy-Map Config
3.4.5 mark cos
This command marks all packets for the associated traffic stream with the specified
class of service value in the priority field of the 802.1p header (the only tag in a single
tagged packet or the first or outer 802.1Q tag of a double VLAN tagged packet). If the
packet does not already contain this header, one is inserted. The CoS value is an integer
from 0 to 7.
Default
1
Format
mark-cos
<0-7>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark IP DSCP, IP Precedence, Police
3.4.6 mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP
DSCP value.