Kontron AT8402 CLI - Manual (Page 178)

Utility Commands AT8402
AT8402 CLI Reference Manual Page 4 - 38
Mode Global Config
4.8.17 ip dhcp ping packets
Use this command to specify the number, in a range from 2-10, of packets a DHCP
server sends to a pool address as part of a ping operation. By default the number of
packets sent to a pool address is 2, which is the smallest allowed number when sending
packets. Setting the number of packets to 0 disables this command.
Default 2
Format
ip dhcp ping packets
<0,2-10>
Mode Global Config
4.8.17.1 no ip dhcp ping packets
This command prevents the server from pinging pool addresses and sets the number of
packets to 0.
Default 0
Format no ip dhcp ping packets
Mode Global Config
4.8.18 service dhcp
This command enables the DHCP server.
Default disabled
Format
service dhcp
Mode Global Config
4.8.18.1 no service dhcp
This command disables the DHCP server.
Format
no service dhcp
Mode Global Config
4.8.19 ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The
addresses are from the automatic address pool.
Default disabled
Format
ip dhcp bootp automatic
Mode Global Config
4.8.19.1 no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address
are from the automatic address pool.
Format no ip dhcp bootp automatic