Kontron AT8402 CLI - Manual (Page 76)

Switching Commands AT8402
AT8402 CLI Reference Manual Page 2 - 44
If you do not use any of the optional parameters, the global dot1x configuration
summary is displayed.
Administrative mode Indicates whether authentication control on the switch is
enabled or disabled.
If you use the optional parameter
summary {<
slot/port
> | all}
, the dot1x
configuration for the specified port or all ports are displayed.
Port The interface whose configuration is displayed.
Control Mode The configured control mode for this port. Possible values are force-
unauthorized | force-authorized | auto.
Operating Control Mode The control mode under which this port is operating. Possi-
ble values are authorized | unauthorized.
Reauthentication Enabled Indicates whether re-authentication is enabled on this
port.
Key Transmission Enabled Indicates if the key is transmitted to the supplicant for
the specified port.
If the optional parameter 'detail < slot/port>' is used, the detailed dot1x configuration
for the specified port are displayed.
Port The interface whose configuration is displayed.
Protocol Version The protocol version associated with this port. The only possible
value is 1, corresponding to the first version of the dot1x specification.
PAE Capabilities The port access entity (PAE) functionality of this port. Possible val-
ues are Authenticator or Supplicant.
Authenticator PAE State Current state of the authenticator PAE state machine. Possi-
ble values are Initialize, Disconnected, Connecting, Authenticating,
Authenticated, Aborting, Held, ForceAuthorized, and ForceUnautho-
rized.
Backend Authentication State Current state of the backend authentication state
machine. Possible values are Request, Response, Success, Fail, Time-
out, Idle, and Initialize.
Quiet Period The timer used by the authenticator state machine on this port to
define periods of time in which it will not attempt to acquire a suppli-
cant. The value is expressed in seconds and will be in the range 0 and
65535.
Transmit Period The timer used by the authenticator state machine on the specified
port to determine when to send an EAPOL EAP Request/Identity
frame to the supplicant. The value is expressed in seconds and will be
in the range of 1 and 65535.
Supplicant Timeout The timer used by the authenticator state machine on this port to
timeout the supplicant. The value is expressed in seconds and will be
in the range of 1 and 65535.
Server Timeout The timer used by the authenticator on this port to timeout the
authentication server. The value is expressed in seconds and will be in
the range of 1 and 65535.