Kontron AT8402 CLI - Manual (Page 39)

AT8402 Switching Commands
Page 2 - 7 AT8402 CLI Reference Manual
Format
no spanning-tree
Mode Global Config
2.2.2 spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple
spanning tree (MSTP) BPDUs. Use the
<
slot/port
>
parameter to transmit a BPDU
from a specified interface, or use the
all
keyword to transmit BPDUs from all
interfaces. This command forces the BPDU transmission when you execute it, so the
command does not change the system configuration or have a “no” version.
Format
spanning-tree bpdumigrationcheck
{<slot/port> | all}
Mode Global Config
2.2.3 spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the
configuration that this switch is currently using. The
<name>
is a string of up to 32
characters.
Default base MAC address in hexadecimal notation
Format
spanning-tree configuration name <name>
Mode Global Config
2.2.3.1 no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
no spanning-tree configuration name
Mode Global Config
2.2.4 spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying
the configuration that this switch is currently using. The Configuration Identifier
Revision Level is a number in the range of 0 to 65535.
Default 0
Format
spanning-tree configuration revision <0-65535>
Mode Global Config
2.2.4.1 no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying
the configuration that this switch is currently using to the default value.
Format
no spanning-tree configuration revision
Mode Global Config