Kontron AT8402 CLI - Manual (Page 175)

AT8402 Utility Commands
Page 4 - 35 AT8402 CLI Reference Manual
4.8.8.1 no lease
This command restores the default value of the lease time for DHCP Server.
Format
no lease
Mode DHCP Pool Config
4.8.9 network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool
on the server. Network-number is a valid IP address, made up of four decimal bytes
ranging from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the
specified address pool. The prefix-length is an integer from 0 to 32.
Default none
Format
network
<networknumber> [{<mask> | <prefixlength>}]
Mode DHCP Pool Config
4.8.9.1 no network
This command removes the subnet number and mask.
Format no network
Mode DHCP Pool Config
4.8.10 bootfile
The command specifies the name of the default boot image for a DHCP client. The
<filename> specifies the boot image file.
Format
bootfile
<filename>
Mode DHCP Pool Config
4.8.10.1 no bootfile
This command deletes the boot image name.
Format no bootfile
Mode DHCP Pool Config
4.8.11 domain-name
This command specifies the domain name for a DHCP client. The <domain> specifies
the domain name string of the client.
Default none
Format
domain-name
<domain>
Mode DHCP Pool Config
4.8.11.1 no domain-name
This command removes the domain name.