8 set board clock map, 8 set board clock map - 39, At8402 management commands – Kontron AT8402 CLI User Manual
Page 229
AT8402
Management Commands
Page 5 - 39
AT8402 CLI Reference Manual
5.16.8
set board clock map
This command selects/deselects a source for a backplane clock. If a source is selected
the attributes (frequency) must be set too. Other attributes are fixed (direction=source,
family=1, accuracy=50).
Format
set board clock map
{clk1a | clk1b | clk2a | clk2b | clk3a | clk3b}
from
{amcb1 | amcb2 | amcb3 | amcb4}
{tclkb | tclkd}
enable 8kHz
set board clock map
{clk1a | clk1b | clk2a | clk2b | clk3a | clk3b}
from
{amcb1 | amcb2 | amcb3 | amcb4}
{tclkb | tclkd}
enable
1_544MHz
set board clock map
{clk1a | clk1b | clk2a | clk2b | clk3a | clk3b}
from
{amcb1 | amcb2 | amcb3 | amcb4}
{tclkb | tclkd}
enable
2_048MHz
set board clock map
{clk1a | clk1b | clk2a | clk2b | clk3a | clk3b}
from
{amcb1 | amcb2 | amcb3 | amcb4}
{tclkb | tclkd}
enable
19_44MHz
set board clock map
{clk1a | clk1b | clk2a | clk2b | clk3a | clk3b}
from
{amcb1 | amcb2 | amcb3 | amcb4}
{tclkb | tclkd}
disable
Mode
Privileged Exec