2 macfilter addsrc, 3 macfilter addsrc all, 4 show mac-address-table static – Kontron AT8402 CLI User Manual
Page 91: At8402 switching commands
AT8402
Switching Commands
Page 2 - 59
AT8402 CLI Reference Manual
2.14.2
macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the
MAC address of <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must
be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
<vlanid>
parameter must identify a valid VLAN.
Format
macfilter addsrc
<macaddr> <vlanid>
Mode
Interface Config
2.14.2.1
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the
MAC address of
<macaddr>
and VLAN of
<vlanid>
. The <macaddr> parameter
must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
parameter must identify a valid VLAN.
Format
no macfilter addsrc
<macaddr> <vlanid>
Mode
Interface Config
2.14.3
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the
MAC address of
<macaddr>
and
<vlanid>
. You must specify the
<macaddr>
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
<vlanid>
parameter must identify a valid VLAN.
Format
macfilter addsrc all
<macaddr> <vlanid>
Mode
Global Config
2.14.3.1
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the
MAC address of
<macaddr>
and VLAN of
<vlanid>
. You must specify the
<macaddr>
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
parameter must identify a valid VLAN.
Format
no macfilter addsrc all
<macaddr> <vlanid>
Mode
Global Config
2.14.4
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC
Filters. If you select
<all>
, all the Static MAC Filters in the system are displayed. If
you supply a value for
<macaddr>,
you must also enter a value for
<vlanid>
, and the
system displays Static MAC Filter information only for that MAC address and VLAN.
Format
show mac-address-table static
{<macaddr> <vlanid> | all}
Mode
Privileged EXEC
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID
The VLAN ID of the static MAC filter entry.