Kontron AT8402 CLI - Manual (Page 173)

AT8402 Utility Commands
Page 4 - 33 AT8402 CLI Reference Manual
4.8.3 client-name
This command specifies the name for a DHCP client. Name is a string consisting of
standard ASCII characters.
Default none
Format client-name <name>
Mode DHCP Pool Config
4.8.3.1 no client-name
This command removes the client name.
Format
no client-name
Mode DHCP Pool Config
4.8.4 default-router
This command specifies the default router list for a DHCP client. {address1,
address2… address8} are valid IP addresses, each made up of four decimal bytes
ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default none
Format default-router <address1> [<address2>....<address8>]
Mode DHCP Pool Config
4.8.4.1 no default-router
This command removes the default router list.
Format
no default-router
Mode DHCP Pool Config
4.8.5 dns-server
This command specifies the IP servers available to a DHCP client. Address parameters
are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP
address 0.0.0.0 is invalid.
Default none
Format
dns-server
<address1> [<address2>....<address8>]
Mode DHCP Pool Config
4.8.5.1 no dns-server
This command removes the DNS Server list.
Format
no dns-server
Mode DHCP Pool Config