Kontron AT8402 CLI - Manual (Page 29)

AT8402 Using the Command-Line Interface
Page 1 - 7 AT8402 CLI Reference Manual
1.5.1 Command Completion and Abbreviation
Command completion finishes spelling the command when you type enough letters of
a command to uniquely identify the command keyword. Once you have entered
enough letters, press the SPACEBAR or TAB key to complete the word.
Command abbreviation allows you to execute a command when you have entered there
are enough letters to uniquely identify the command. You must enter all of the required
keywords and parameters before you enter the command.
Interface Config From the Global Config mode, enter
interface < slot/port > or inter-
face loopback <id> or interface
tunnel <id> or
To exit to the Global Config
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
Line Config From the Global Config mode, enter
lineconfig .
To exit to the Global Config
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
Policy-Map
Config From the Global Config mode, enter
policy-map .
To exit to the Global Config
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
Policy-Class-
Map Config From the Policy Map mode enter
class .
To exit to the Policy Map
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
Class-Map
Config From the Global Config mode, enter
class-map .
To exit to the Global Config
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
MAC Access-list
Config From the Global Config mode, enter
mac access-list extended
<name>
.
To exit to the Global Config
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
TACACS Config From the Global Config mode, enter
tacacs-server host <ip-addr> ,
where <ip-addr> is the IP address of
the TACACS server on your network.
To exit to the Global Config
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
DHCP Pool
Config From the Global Config mode, enter
ip dhcp pool <pool-name> .
To exit to the Global Config
mode, enter
exit . To return
to the Privileged EXEC
mode, enter
Ctrl-Z .
Table 4.6. CLI Mode Access and Exit
Command
Mode
Access Method
Exit or Access Previous
Mode