Kontron AT8402 CLI - Manual (Page 177)

AT8402 Utility Commands
Page 4 - 37 AT8402 CLI Reference Manual
Format
next-server
<address>
Mode DHCP Pool Config
4.8.14.1 no next-server
This command removes the boot server list.
Format
no next-server
Mode DHCP Pool Config
4.8.15 option
The
option
command configures DHCP Server options. The <code> parameter
specifies the DHCP option code and ranges from 1-254. The <ascii string> parameter
specifies an NVT ASCII character string. ASCII character strings that contain white
space must be delimited by quotation marks. The hex <string> parameter specifies
hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You
can separate each byte by a period (for example, a3.4f.22.0c), colon (for example,
a3:4f:22:0c), or white space (for example, a3 4f 22 0c).
Default none
Format
option
<code> {ascii string | hex <string1>
[<string2>...<string8>] | ip <address1>
[<address2>...<address8>]}
Mode DHCP Pool Config
4.8.15.1 no option
This command removes the DHCP Server options. The <code> parameter specifies the
DHCP option code.
Format no option <code>
Mode DHCP Pool Config
4.8.16 ip dhcp excluded-address
This command specifies the IP addresses that a DHCP server should not assign to
DHCP clients. Low-address and high-address are valid IP addresses; each made up of
four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default none
Format
ip dhcp excluded-address
<lowaddress> [highaddress]
Mode Global Config
4.8.16.1 no ip dhcp excluded-address
This command removes the excluded IP addresses for a DHCP client. Low-address and
high-address are valid IP addresses; each made up of four decimal bytes ranging from
0 to 255. IP address 0.0.0.0 is invalid.
Format
no ip dhcp excluded-address
<lowaddress> [highaddress]