Altera 100G Development Kit, Stratix V GX Edition - Manual (Page 40)

2–32 Chapter 2: Board Components
Components and Interfaces
100G Development Kit, Stratix V GX Edition August 2012 Altera Corporation
Reference Manual
Table 2–25 lists the flash memory device component reference and manufacturing
information.
Components and Interfaces
This section describes the development board's communication ports, external
memory, and interface cards relative to the Stratix V GX device. The development
board supports the following components and interfaces:
■ Transceiver interfaces
■ QSFP Interface
■ Small Form-Factor Pluggable (SFP+) Interface
■ CFP Interface
■ Interlaken Interface
■ External memory
■ DDR3 Interface
■ QDR II Interface
■ Gigabit Ethernet interface
■ Heatsink and fan
Transceiver Interfaces
The Stratix V GX 100G development board includes four transceiver interfaces that
utilize 46 transceiver channels. There are eight channels on the QSFP interface, four
independent channels on the SFP+, 10 channels on the CFP interface, and 24 channels
that make up the Interlaken interface.
H7 FSM_D7 2.5-V CMOS AF13 Flash data bus
E1 FSM_D8 2.5-V CMOS AP9 Flash data bus
E3 FSM_D9 2.5-V CMOS AJ32 Flash data bus
F3 FSM_D10 2.5-V CMOS AT33 Flash data bus
F4 FSM_D11 2.5-V CMOS AK9 Flash data bus
F5 FSM_D12 2.5-V CMOS AN38 Flash data bus
H5 FSM_D13 2.5-V CMOS AJ21 Flash data bus
G7 FSM_D14 2.5-V CMOS BC10 Flash data bus
E7 FSM_D15 2.5-V CMOS BB36 Flash data bus
Table 2–24. Flash Memory Pin Assignments, Schematic Signal Names, and Functions (Part 3 of 3)
Board
Reference (U60)
Schematic Signal
Name
I/O Standard
Stratix V GX Device
Pin Number
Description
Table 2–25. Flash Memory Component References And The Manufacturing Information
Board Reference Description Manufacturer
Manufacturing
Part Number
Manufacturer
Website
U60 1-Gb NOR-type flash Numonyx PC28F00AP30BF www.numonyx.com