Altera 100G Development Kit, Stratix V GX Edition - Manual (Page 9)

August 2012 Altera Corporation 100G Development Kit, Stratix V GX Edition
Reference Manual
2. Board Components
Introduction
This chapter introduces all the important components on the Stratix V GX 100G
development board.
Figure 2–1 illustrates major component locations and Table 2–1
provides a brief description of all features of the board.
1
A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Stratix V GX 100G development kit installation
directory.
f
For information about powering up the board and installing the development kit
software, refer to the
100G Development Kit, Stratix V GX Edition User Guide .
This chapter consists of the following sections:
■ “Board Overview” on page 2–2
■ “Featured Device: Stratix V GX FPGA” on page 2–6
■ “MAX II CPLD EPM2210 System Controller” on page 2–11
■ “Configuration, Status, and Setup Elements” on page 2–17
■ “Clock Circuitry” on page 2–23
■ “General User Input/Output” on page 2–26
■ “Flash Memory” on page 2–30
■ “Components and Interfaces” on page 2–32
■ “Power” on page 2–62