ARRIS DCT5100 Installation Manual - Manual (Page 45)

Diagnostics 4-5
DCT5100 Installation Manual
REMOD CHANNEL
The REMOD CHANNEL number can be either 3 or 4 (USA systems). The output port
configuration displays the configuration of the DCT5100 output or re-modulated (remod) port.
The output port/remod port is the interface from the DCT5100 to the subscriber’s television set.
SETTOP TIME
The SETTOP TIME is current OOB set-top time displayed in Global Positioning System (GPS)
seconds from Jan 6, 1980. SET-TOP TIME is an integer value ranging from 0 to 4294967295.
d02 Purchase Status
The PURCHASE STATUS diagnostic displays the status of subscriber event purchases on the
OSD and LED. The OSD and LED information displays are updated each time this diagnostic is
accessed.
Table 4-4 illustrates the PURCHASE STATUS diagnostics OSD:
Table 4-4
PURCHASE STATUS - OSD
PURCHASE STATUS
PURCHASES
UNSENT: xx
UNACK: xx
LAST SEQ NUM: xxxx
LAST RB TIME: xxxxxxxxxx
IPPV Status
Enabled
Figure 4-3 is the front-panel LED display for the PURCHASE STATUS diagnostic:
Figure 4-3
PURCHASE STATUS - LED
MUTE MUTE
P
IPPV
status indicator
is on
when enabled
Number of
unsent
purchases
Purchase
indicator