ARRIS DCT5100 Installation Manual - Manual (Page 62)

4-22 Diagnostics
DCT5100 Installation Manual
d07 RF MODEM (Upstream)
The RF MODEM diagnostic displays the appropriate modem information based on the module
installed in the DCT5100.
Table 4-30 illustrates the status of the RF upstream modem:
Table 4-30
RF upstream modem
RF MODEM
STATUS: NOT CONFIGURED
CENTER FREQUENCY: 9.0000 MHz
REQUESTED POWER LEVEL: 23 dB
ACTUAL POWER LEVEL: 20 dB
REPORTBACK ADDRESS: xx xx xx xx
LAST RB ATTEMPT TIME: xxxxxxxxxx
The information on the OSD and LED is updated each time this diagnostic is accessed.
Figure 4-8 illustrates the LED for the RF upstream modem:
Figure 4-8
RF upstream modem - LED
MUTE MUTE
P
MUTE MUTE
P
Decimal point
Alternating with
Frequency
indicator
Frequency
in MHz
Actual power
level indicator
Actual power
level in dB
(value will be blank
if modem not configured)
STARVUE
frequency
STARVUE
power level