ARRIS DCT5100 Installation Manual - Manual (Page 67)

Diagnostics 4-27
DCT5100 Installation Manual
OSD Display Status Description
DELETING Deleting Object is in the process of being deleted.
POSTPONED Postponed Object is not runnable in the current system; will be
enabled on next boot.
CONNECTED Connect Connected to download PID − awaiting data.
PEND CONNECT TryingToConnect Trying to connect.
SEGS / TIME
Each object is displayed on the OSD and LED segments that remain for the object download in
progress. The time (in GPS seconds) is displayed on the OSD when the download is complete.
d09 MEMORY CONFIGURATION
This diagnostic displays the memory configuration of the set-top. The AppOS may supplement
the memory configuration with memory allocation per application in the future.
Table 4-33 illustrates the memory status display:
Table 4-33
MEMORY CONFIGURATION - OSD
MEMORY CONFIGURATION
SYSTEM RAM: 32 MB
FLASH: 16 MB
NVRAM: 256 KB
An LED display is not available for this diagnostic. The information on the OSD is updated
upon entry to this diagnostic.
MEMORY CONFIGURATION
The amount of allocated memory for the SYSTEM RAM and FLASH are displayed in MB. The
amount of allocated memory for NVRAM is displayed in KB.