ARRIS DCT5100 Installation Manual - Manual (Page 50)

4-10 Diagnostics
DCT5100 Installation Manual
OOB Automatic Gain Control (AGC)
The OSD displays an estimate of the AGC in percentage and an explanation for the value.
Table 4-11 lists the AGC values for the OSD:
Table 4-11
AGC indicators
Indicator Meaning
GOOD Good value
FAIR Marginal signal level, check the signal
POOR Unusable signal
INVALID AGC value not valid
This field is valid only when carrier lock has been established.
NETWORK PID
The DCT5100 is tuned to the NETWORK PID to receive network messages. This value is
displayed in hexadecimal format.
EMM PID
The EMM PID is the PID stream the set-top tunes to for EMM data. This value is displayed in
hexadecimal format.
EMM PROVIDER ID
The EMM PROVIDER ID specifies the conditional access stream for the DCT5100 and is
displayed in hexadecimal format.