ARRIS DCT5100 Installation Manual - Manual (Page 74)

4-34 Diagnostics
DCT5100 Installation Manual
d13 INTERACTIVE INFO
This section describes the interactive information that is displayed only when Thin Client
platform is running. Table 4-3 shows an example of the diagnostic information on the
INTERACTIVE INFO Diagnostics OSD. The actual format for the display may vary. The
information on the OSD and LED is updated at least once every 5 seconds while the diagnostic
is displayed.
Table 4-36 illustrates a code module display with status descriptions:
Table 4-36
INTERACTIVE INFO - OSD
INTERACTIVE INFO
IP ADDRESS:
UPM:
UPSTREAM ID:
DOWNSTREAM ID:
STATE:
MAC ABORT COUNTER:
0.0.0.0
00000021
0000
0000
UNCONFIG
0000
SOCKET PORT STATE:
0 UNUSED
1 UNUSED
2 UNUSED
3 UNUSED
4 UNUSED
Figure 4-11 illustrates the code module LED display:
Figure 4-11
Sample INTERACTIVE INFO LED
IP ADDRESS
The IP ADDRESS for the set-top is assigned by the NC 1500. It is displayed as four decimal
fields delimited by periods, for example, xxx.xxx.xxx.xxx where each xxx ranges from 000 to 255.
0.0.0.0 is displayed when the IP address is not configured or unknown.