ARRIS DCT5100 Installation Manual - Manual (Page 46)

4-6 Diagnostics
DCT5100 Installation Manual
Unsent Purchases
The UNSENT field is the number of purchases in the set-top remaining to be polled. The
number of purchases can range from 0 to 63 decimal.
Unacknowledged Reports
The UNACK is the number of reports that have not been acknowledged by the controller. The
number of reports that have not been acknowledged is displayed in decimal format.
Last Acknowledged Purchase
The LAST SEQ NUM is the last acknowledged sequence number of a purchase sent by the
controller. The sequence number is a 16 bit unsigned that is displayed in hexadecimal format.
Last Purchase Reportback
The LAST RB TIME indicates the last time the set-top attempted to reportback purchases to
the controller. The time of the last purchase reportback is displayed in GPS seconds.
IPPV Status
The IPPV Status of Enabled or Disabled is displayed on the OSD. The LED IPPV Status
indicator is on when IPPV status is enabled.
Table 4-5 lists the IPPV Status indicators for OSD and LED:
Table 4-5
IPPV status indicators – OSD and LED
OSD Display LED Indicator Definition
ENABLED on IPPV Enabled
DISABLED off IPPV Disabled