D12 user setting status, Output type – ARRIS DCT5100 Installation Manual User Manual

Page 70

Advertising
background image

4-30

Diagnostics

DCT5100 Installation Manual

d12 USER SETTING STATUS

This section displays the user settings. Table 4-35 shows an example of the diagnostic
information recommended for the User Setting Status OSD. The actual format for the display
may vary. The information on the OSD and LED is updated upon entry to the diagnostic OSD.

Table 4-35 illustrates the USER SETTING STATUS display:

Table 4-35
USER SETTING STATUS – OSD

USER SETTING STATUS

OUTPUT TYPE

1080I

CLOSED CAPTION ENABLED

PEN SIZE

STANDARD

FONT STYLE

MONO SERIF

FOREGROUND COLOR

BLACK

FOREGROUND OPACITY

AUTO

BACKGROUND COLOR

WHITE

BACKGROUND OPACITY

AUTO

SERVICE SELECTION

PRIMARY LANGUAGE

SETTINGS

ASPECT RATIO:

USER

LETTERBOX

OUTPUT TYPE

Displays the High Definition video display format:

OSD Display

Definition

1080I

1920 pixels wide by 1080 pixels high, 16:9 screen
aspect ratio, 30 frames per second, interlaced.

720P

1280 pixels wide by 720 pixels high, 16:9 screen aspect
ratio, 30 frames per second, progressive.

480P

720 pixels wide by 480 pixels high, 4:3 screen aspect
ratio, 30 frames per second, progressive.

480I

720 pixels wide by 480 pixels high, 4:3 screen aspect
ratio, 30 frames per second, interlaced.

NATIVE

Adjusts the video display format to match the video
source format. Valid for 16:9 High Definition displays
only.

When high definition output modes (1080I, 720P, or 480P) are selected, graphic overlays such as
electronic program guides can only be viewed on the component video outputs. The baseband
video output will continue to transmit baseband video (480I), but without graphic overlays.

Advertising