Rf modem status, Center frequency, Requested power level – ARRIS DCT5100 Installation Manual User Manual
Page 63: Actual power level, Reportback address, Last rb attempt time
Diagnostics 4-23
DCT5100 Installation Manual
RF Modem STATUS
The RF modem STATUS displays CONFIGURED or NOT CONFIGURED, depending on the
state of the modem.
CENTER FREQUENCY
The RF modem CENTER FREQUENCY is displayed on the OSD and LED in MHz.
REQUESTED POWER LEVEL
The REQUESTED POWER LEVEL is the value assigned to the set-top during the RF leveling
process. This level is displayed in dB or is blank if not configured.
ACTUAL POWER LEVEL
The ACTUAL POWER LEVEL is displayed on the OSD and LED in dB or is left blank if the
power level has not been set.
REPORTBACK ADDRESS
The REPORTBACK ADDRESS is displayed if configured. The reportback address is displayed
in 4-byte hexadecimal format.
LAST RB ATTEMPT TIME
The last attempted reportback made by the set-top is displayed here in GPS seconds.