Super Systems 3L Series - Manual (Page 30)

Operations Manual Series 3L
30
7.3 AA Relay Channel (AA) (Output 4 FM Relay)
This is a changeover relay. Connections are made to terminals AA, AB, and AC. OP4 beacon is operated from the AA
relay output channel. Output AA (4) has the same functionality as OP-1 and OP-3 – the parameters are repeated here
for clarity.
FM Relay
OUTPUT AA LIST ‘a a ’
Name Scrolling
Display
Parameter
Description
Value Defaul
t
Access
Level
4 . T Y P E OUTPUT 4
TYPE Displays the type of
output reLy Relay output reLy Read only
4.FUNC OUTPUT 4
FUNCTION The function may be
turned off, otherwise
set to
d.out
none Disabled. If disabled no further
parameters are shown Conf
d.out Digital output
4.SRC.A OUTPUT 4
SOURCE A Selects the source of
an event which will
operate the output
relay
The output status is
the result of an OR of
Src A, Src B, Src C,
and Src D
Up to four events can,
therefore, operate the
output
See section 7.1.2.
none No event connected to the
output
none Conf
4.SRC.B
OUTPUT 4
SOURCE B 1.--- Alarm 1 The --- indicates the
alarm type. If the
alarm is not
configured
AL.(Alarm no) is
shown
2.--- Alarm 2
4.SRC.C OUTPUT 4
SOURCE C 3.--- Alarm 3
4.--- Alarm4
4.SRC.D OUTPUT 4
SOURCE D ALL.A All alarms
nw.AL Any new alarm
sbr
Sensor break alarm
Pwr.f Power fail
O.rng Output relay operates if the
indicator input is over range
4.SENS OUTPUT 4
SENSE To configure the
sense of the output
channel.
See also section 7.2.1 nor
Inv Normal
Inverted nor Conf