Super Systems 3L Series - Manual (Page 4)

Operations Manual Series 3L
4
1. Installation and Basic Operation
Thank you for choosing this Series 3L Process
Indicator.
This unit comes in a single 1/4DIN size with three relay
outputs.
Relay outputs can be configured for alarm and events.
2-wire Modbus digital communications are available in
this unit.
The indicator may have been ordered to a hardware
code only or pre-configured using an optional ‘Quick
Start’ code. The label fitted to the side of the sleeve
shows the ordering code of the indicator. If the Quick
Code shows ***** the indicator will need to be
configured when it is first switched on.
1.1 Unpacking Your Indicator
The following items are included in the box:
• Indicator mounted in its sleeve
• Two panel retaining clips
• AN IP65 sealing gasket mounted on the sleeve
• Component packet containing a snubber for each
relay output and a 2.49
Ω resistor for current inputs
(see section 2)
1.2 Dimensions Front Views
1.3 Dimensions – Side Views