Amer Networks SS3GR24i User Manual

Page 107

Advertising
background image

SS3GR24i/SS3GR48i Layer3 Stackable Gigabit Switch User’s Guide

Figure 6-41. MST Instance Port Configuration Page

Priority

When choosing between 2 paths, the spanning

tree algorithm will choose a path based on the

port with the higher priority (the lower numeric

value). The priority number can range from 0-

240, the default is 128.

Path Cost

This represents the cost of sending a packet

through the port, higher value means slower

port link speed. If two ports have the same

priority, the spanning tree algorithm will cost

the port with the lower cost. The path cost can

range from 1-200000000, the default is 200000

and 0 is auto.

STP Status

Enable/Disable the port STP Status using the

drop down box.

Click the checkbox next to the settings and ports that you want to

apply the settings to, then click the Apply button to save the

101

Advertising
This manual is related to the following products: