Vlans by vlan-id – Amer Networks SS3GR24i User Manual
Page 87
Advertising
SS3GR24i/SS3GR48i Layer3 Stackable Gigabit Switch User’s Guide
packets to outside sources, notifying that
they may join the existing VLAN. Click the
check box to enable.
Admit Tagged
Only
This option specifies whether the port can
admit all frames or only VLAN-tagged
frames. Click the check box to enable.
Click Apply to save the changes or Restore to change them back to
the previous configuration.
VLANs by VLAN-ID
Previously created VLANs can be viewed, modified and deleted by
clicking on the VLANs by VLAN-ID page located in the VLAN
Configuration Subfolder in the VLANS Folder.
Figure 6-26. VLANS by VLAN-ID Page
Set management
This option allows the selection of a different
VLAN to be the management VLAN. Select
81
Advertising
This manual is related to the following products: