Amer Networks SS3GR24i - Manual (Page 81)

SS3GR24i/SS3GR48i Layer3 Stackable Gigabit Switch User’s Guide
ReAuth Period (sec) Select the time interval between
successive re-authentications.
ReAuth Status Enable or disable reauthentication.
Configure Ports from
1 to
Use the pull-down menu to select the
desired range of ports to configure.
Click Apply to implement your configuration changes.
Link Aggregation
Link aggregation uses LACP (Link Aggregation Control Protocol)
to combine a number of ports together to make a single high-
bandwidth data pipeline. The participating parts are called
members of a link aggregation group, with one port designated as
the master port of the group. Since all members of the link
aggregation group must be configured to operate in the same
manner, the configuration of the master port is applied to all
members of the link aggregation group. Link Aggregation is a
Subfolder of the Ports Folder
System Priority
System Priority specifies the switch’s link aggregation priority
relative to other switches at the other ends of the links on which
link aggregation is enabled. To configure System Priority settings,
click the Ports Folder, and then the Port Security Subfolder and
then the System Priority Page.
75