Amer Networks SS3GR24i - Manual (Page 112)

SS3GR24i/SS3GR48i Layer3 Stackable Gigabit Switch User’s Guide
Destination
MAC
Enter destination MAC address for classifier
VLAN ID
VLAN ID for classifier
DSCP
6-bit DSCP (DiffServ Code Point) value in IP
header for classifier
Protocol
8-bit protocol value in IP header for classifier:
6=TCP, 17=UDP, 1=ICPM, 2=IGMP, 46=RSVP
Source IP
Address
Source IP Address for classifier
Destination IP
Address
Destination IP address for classfier.
Source Layer 4
Port
The source Layer 4 (transportation layer) port
number of a data packet. It is 2 bytes with a
value of 0-65535.
Destination
Layer 4 Port
The destination Layer 4 (transportation layer)
port number of a data packet. It is 2 bytes with
a value of 0-65535.
Click Apply to save the changes
The table at the bottom of the page lists all classifier entries and
the settings applied to them. Click Next Page and Previous Page
to cycle through the entries.
Create In-Profile Action
This applies to the ingress (in-bound traffic) data packets that
match the classifier set for that QoS Policy.
106