RIGOL DG1000Z Series - Manual (Page 20)

RIGOL Chapter 2 Command System
2-8 DG1000Z Programming Guide
:COUNter:STATIstics:CLEAr
Syntax :COUNter:STATIstics:CLEAr
Description Clear the statistic results.
Explanation  This command is only valid when the statistic function of the frequency
counter is enabled ( :COUNter:STATIstics[:STATe] ).
 The statistic results are cleared automatically when the statistic function of the
frequency counter is disabled.
Related
Command
:COUNter:STATIstics[:STATe]
:COUNter:STATIstics:DISPlay
Syntax :COUNter:STATIstics:DISPlay {DIGITAL|CURVE}
:COUNter:STATIstics:DISPlay?
Description Set the display format of the statistic results of the measurement values of the
frequency counter to DIGITAL or CURVE.
Query the display format of the statistic results of the measurement values of the
frequency counter.
Parameter Name Type Range Default
{DIGITAL|CURVE} Discrete DIGITAL|CURVE DIGITAL
Return Format The query returns DIGITAL or CURVE.
Example :COUN:STATI:DISP CURVE /*Set the display format of the statistic results of the
measurement values of the frequency counter to
CURVE*/
:COUN:STATI:DISP? /*Query the display format of the statistic results of
the measurement values of the frequency counter
and the query returns CURVE*/
:COUNter:STATIstics[:STATe]
Syntax :COUNter:STATIstics[:STATe] {ON|1|OFF|0}
:COUNter:STATIstics[:STATe]?
Description Enable or disable the statistic function of the measurement values of the frequency
counter.
Query the on/off status of the statistic function of the measurement values of the
frequency counter.
Parameter Name Type Range Default
{ON|1|OFF|0} Bool ON|1|OFF|0 OFF
Return Format The query returns ON or OFF.
Example :COUN:STATI ON /*Enable the statistic function of the measurement values of
the frequency counter*/
:COUN:STATI? /*Query the on/off status of the statistic function of the
measurement values of the frequency counter and the query
returns ON*/