RIGOL DG1000Z Series - Manual (Page 35)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-23
:DISPlay Commands
The :DISPlay commands are used to set the display-related information, display the specified characters on
the screen and clear the characters displayed on the screen.
Command List:
 :DISPlay:BRIGhtness
 :DISPlay:CONTrast
 :DISPlay:DATA?
 :DISPlay:MODE
 :DISPlay:SAVer:IMMediate
 :DISPlay:SAVer[:STATe]
 :DISPlay[:STATe]
 :DISPlay:TEXT?
 :DISPlay:TEXT:CLEar
 :DISPlay:TEXT[:SET]
:DISPlay:BRIGhtness
Syntax :DISPlay:BRIGhtness {<brightness>|MINimum|MAXimum}
:DISPlay:BRIGhtness? [MINimum|MAXimum]
Description Set the screen brightness.
Query the screen brightness.
Parameter Name Type Range Default
<brightness> Integer 1% to 100% 50%
Return Format The query returns the screen brightness in scientific notation. The return value
contains 7 effective digits, for example, 5.100000E+01 (the screen brightness is
51%).
Example :DISP:BRIG 51 /*Set the screen brightness to 51%*/
:DISP:BRIG? /*Query the screen brightness and the query returns
5.100000E+01*/