Coupling:phase[:state – RIGOL DG1000Z Series User Manual
Page 33
RIGOL
DG1000Z Programming Guide
2-21
:COUPling:PHASe[:STATe]
Syntax
:COUPling:PHASe[:STATe] {ON|1|OFF|0}
:COUPling:PHASe[:STATe]?
Description
Enable or disable the phase coupling function.
Query the on/off status of the phase coupling function.
Parameter
Name
Type
Range
Default
{ON|1|OFF|0}
Bool
ON|1|OFF|0
OFF
Explanation
After the phase coupling function is enabled, CH1 and CH2 take each other as the
reference source. When the phase of a channel (this channel is the reference
source) is changed, the phase of the other channel changes accordingly
automatically and always keeps the specified phase deviation or ratio with that of
the reference channel.
Select the desired phase coupling mode (
) and set the
corresponding phase deviation (
) or phase ratio
) before enabling the phase coupling function. You
cannot set the phase coupling mode and phase deviation/ratio after the phase
coupling function is enabled.
When the phase coupling function is disabled, you can select the phase coupling
mode and set the corresponding phase deviation or ratio.
Return Format
The query returns ON or OFF.
Example
:COUP:PHAS ON /*Enable the phase coupling function*/
:COUP:PHAS? /*Query the on/off status of the phase coupling function and the
query returns ON*/
Related
Commands
:COUPling:PHASe:MODE
:COUPling:PHASe:RATio