RIGOL DG1000Z Series - Manual (Page 205)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-193
:SYSTem:COMMunicate:LAN:GATEway
Syntax :SYSTem:COMMunicate:LAN:GATEway <address>
:SYSTem:COMMunicate:LAN:GATEway?
Description Set the default gateway.
Query the default gateway.
Parameter Name Type Range Default
<address> ASCII string Refer to the “Explanation” None
Explanation  This command is only valid when the ManualIP configuration mode is turned on
( :SYSTem:COMMunicate:LAN:STATic[:STATe] ).
 The format of <address> is nnn.nnn.nnn.nnn; wherein, the first nnn ranges
from 1 to 223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available default gateway from their
network administrator.
 After sending this command, the new settings will only take effect when
the :SYSTem:COMMunicate:LAN:APPLy command is executed to apply the
current network parameters.
Return Format The query returns a string, for example, 192.168.1.1.
Example :SYST:COMM:LAN:GATE 192.168.1.1 /*Set the default gateway to
192.168.1.1*/
:SYST:COMM:LAN:GATE? /*Query the default gateway and the
query returns 192.168.1.1*/
Related
Commands
:SYSTem:COMMunicate:LAN:APPLy
:SYSTem:COMMunicate:LAN:STATic[:STATe]
:SYSTem:COMMunicate:LAN:HOSTname
Syntax :SYSTem:COMMunicate:LAN:HOSTname <name>
:SYSTem:COMMunicate:LAN:HOSTname?
Description Set the host name.
Query the host name.
Parameter Name Type Range Default
<name> ASCII string Refer to the “Explanation” YYYrigollan
Explanation <name> is the specified host name and cannot exceeds 99 characters (can include
English characters and numbers).
Return Format The query returns a string.
Example :SYST:COMM:LAN:HOST RIGOL123 /*Set the host name to RIGOL123*/
:SYST:COMM:LAN:HOST? /*Query the host name and the query returns
RIGOL123*/