Chapter 3 application examples, Chapter 3, Application examples -1 – RIGOL DG1000Z Series User Manual
Page 221
Chapter 3 Application Examples
RIGOL
DG1000Z Programming Guide
3-1
Chapter 3 Application Examples
This chapter provides some application examples of the SCPI commands. A series of SCPI commands are
combined to realize the main functions of the signal generator.
Note:
1. The examples in this chapter are based on DG1062Z. For other models, the ranges of some
parameters might be different. When using the commands, please make proper adjustment according
to the model of your instrument.
2. Before using the examples in this chapter, please select the desired communication interface (USB,
LAN or GPIB) and make correct connections (refer to the introductions in “To Build Remote
Communication”). Besides, you have to install Ultra Sigma or other PC software for sending
commands on your PC.
3. The content enclosed in “/*” and “*/” after each command in the examples of this chapter is
annotation for easier understanding and is not a part of the command.
Main topics of this chapter:
To Output Arbitrary Waveform
To Output AM Modulated Waveform