Source[<n>]]:apply:dc – RIGOL DG1000Z Series User Manual
Page 86
RIGOL
2-74
DG1000Z Programming Guide
[:SOURce[<n>]]:APPLy:DC
Syntax
[:SOURce[<n>]]:APPLy:DC [{<frequency>|DEF}[,{<amplitude>|DEF}
[,{<offset>|DEFault|MINimum|MAXimum}]]]
Description
Set the waveform of the specified channel to DC with the specified offset.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<offset>
Real
Refer to the “Explanation”
0V
DC
Explanation
When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related
parameters of CH1 by default.
<frequency> and <amplitude> are not applicable to the DC function but they
must be specified as a placeholder.
The range of <offset> is limited by the “Impedance”
) setting.
Return Format
Set the waveform of the specified channel to DC with the specified offset.
Example
:SOUR1:APPL:DC 1,1,2 /*Set the waveform of CH1 to DC with 2V
DC
offset*/
Related
Commands
:OUTPut[<n>]:IMPedance
:OUTPut[<n>]:LOAD