Roland VR-6HD Direct Streaming AV Mixer - Manual (Page 138)

138
Menu List
15: SYSTEM
Menu item
Value (bold text: default
value)
Explanation
DATE&TIME
Menu item Value Explanation
CONFIGURE
Selects how the time is set.
MANUAL The time is set manually.
USING NTP The time is set by retrieving the time from an NTP server.
TIME ZONE – Sets the time zone.
DATE FORMAT
Month/Day/Year
Day/Month/Year
Year/Month/Day
Sets the format used for displaying the date.
CLOCK TYPE ANALOG , DIGITAL Sets the type of time display used.
NTP SERVER – Specifies the default NTP server.
Bluetooth
Menu item Value Explanation
Bluetooth OFF , ON Turns the Bluetooth function on/off.
PAIRING EXEC Begins pairing with a Bluetooth device.
STATUS
Displays the Bluetooth connection status.
OFF
Bluetooth off
PAIRING MODE Now pairing
NOT CONNECTED Waiting for connection
CONNECTED Connected
HDCP (*1)
Specifies whether HDCP is enabled (ON) or disabled (OFF).
OFF Copy-protected (HDCP) video cannot be input.
ON
Copy-protected (HDCP) video can be input. HDCP is also added to the video that is output.
* Video/audio from the USB STREAM connector is not outputted.
SYSTEM FORMAT (*1) 1080p , 720p Specifies the system format. The output format is the same as the system format.
VIDEO OUT 1–3 1080p , 1080i, 720p Sets the output format for the VIDEO OUT 1–3 connectors.
USB OUT 1080p , 720p Specifies the output format of the USB STREAM connector.
STREAM/RECORD 1080p , 720p Specifies the output format of the DIRECT STREAM port.
FRAME RATE (*1)
60, 59 .94 , 50, 30, 29.97, 25,
24, 23.98Hz
Specifies the frame rate.
USB OUT (*1)
30, 60Hz
Specifies the frame rate of the USB STREAM connector.
* The value differs depending on the “FRAME RATE” setting.
29.97, 59 .94Hz
25, 50Hz
STREAM/RECORD (*1)
30, 60Hz
Specifies the frame rate of the DIRECT STREAM port.
* The value differs depending on the “FRAME RATE” setting.
29 .97 , 59.94Hz
25, 50Hz
PANEL OPERATION
Specifies the operation mode for video transitions.
DISSOLVE This mode selects the video to output and immediately outputs it to the PGM bus.
PGM/PST
In this mode, the PST video is displayed in the PVW bus, and you can check the video before
outputting it to the PGM bus.
EFFECTS TRANSITION
SYNC
OFF , ON
Sets whether the PinP/DSK composites are switched on and off in tandem with the video
transitions.
When this is “ON”, the PinP/DSK composition turn on/off in tandem with the video transitions.
The composited result that is previewed is sent to final output when transitioning to a
different video.
EFFECTS SPOT DISABLE, ENABLE
Specifies whether the spot function for the [PVW] and [PGM] buttons is enabled (ENABLE) or
disabled (DISABLE).
With the spot function, long-pressing the [PVW] or [PGM] button for each layer shows only
the layer that is targeted for the operation while the button is pressed.
AUDIO FADER/KNOB MODE
CATCH
When a fader or knob is operated, if the position of the fader or knob does not match the
value of the parameter, the operation is ignored until the position matches the parameter’s
value.
* The [SETUP] button blinks while the fader operations are being ignored. The closer the fader or knob
position gets to the parameter’s value, the faster the button blinks.
DIRECT
The value of the parameter in question immediately changes to match the position of the
fader or knob when you operate them.
(*1) A change in the setting is not applied until you press the [VALUE] knob to confirm.