Returning to the factory settings (factory reset), E (p, Other functions – Roland VR-6HD Direct Streaming AV Mixer User Manual
Page 94
94
Other Functions
Returning to the Factory Settings (Factory Reset)
Here’s how you can return the settings of the VR-6HD to their factory-set state.
If following the procedures described in this manual does not cause the result you expect, try executing a factory reset.
NOTE
¹
When you execute a factory reset, all the settings you’ve made as
well as the data saved on the VR-6HD (preset memory, macros,
sequencer, and still images) is lost.
¹
Do not turn off the power while the message “PROCESSING...” is
shown.
1 .
[MENU] button
Ó
“SYSTEM”
Ó
select “FACTORY RESET”,
and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 .
Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
Factory reset is executed. When the operation is finished, the message
“COMPLETED” appears.
3 .
Press the [MENU] button to close the menu.