Sony MAS-A100 IP-Based Ceiling Beamforming Microphone - Manual (Page 80)

80
Finding out causes/solutions from symptoms (continued)
Indications
Symptom Cause/Solution
The peak level indicators or the
 REC /  REC PAUSE indicator does
not light/flash.
• The “LED” item in the “Common Settings” menu is set to “OFF.”
Display the menu and set it to “ON” (page 69).
“--y--m--d --:--” is displayed as the
recorded date. • The file may have been recorded by a model other than
PCM-D10. The date and time recording format varies depending
on the model.
There are fewer menu items on the
OPTION menu. • Some menu items are not displayed during playback or
recording.
A character in a folder or file
name is displayed in unreadable
characters. • The linear PCM recorder cannot support or display some special
characters and symbols that are entered on a computer using
Windows Explorer or Mac Finder.
The “Please Wait” message does not
disappear. • If the linear PCM recorder is required to process a large amount
of data, the message may be displayed for an extended period
of time. This is not a malfunction of the linear PCM recorder.
Wait until the message disappears. In this case, do not remove
the batteries.
Files
Symptom Cause/Solution
The file transferred from your
computer is not displayed or cannot
be played back. • The linear PCM recorder can recognize up to 8 levels of folders.
• The files other than those the linear PCM recorder supports
may not be displayed. Check the compatible file formats (page
86).
Computer
Symptom Cause/Solution
The linear PCM recorder is not
recognized by your computer. A
folder/file cannot be transferred
from your computer. • Disconnect the linear PCM recorder from your computer and
reconnect it.
• Operation is not guaranteed if you use any system environment
other than those that the linear PCM recorder support.
• Depending on the USB port position, the linear PCM recorder
may not be recognized. If this happens, try another port.