Sony Underwater Housing for Select RX100-Series Cameras - Manual (Page 53)

53
For details on user defined frequency lists, see “User
defined files” on page 54.
The recommended channel plan when “Sony preset:
high density [Digital system only]” is selected cannot
be assigned to the DWR-R01D, DWR-R02D, or
DWR-R02DN.
Specifying channel plans for each frequency
band
Of the channel plans selected with the [Group type]
setting, frequencies that may experience interference
are excluded and only the channel numbers that can be
used are displayed for each frequency band.
If there are multiple channel plan candidates, select the
channel plan you want to use for each frequency band.
Viewing the current frequency list
Click [Summary of channels].
The frequencies available for use in the selected
channel plan are listed for each frequency band.
8
Assign the selected channel plan to the receiver.
Extracting a channel plan
You can extract a channel plan using the [Channel
filtering] setting. This allows you to assign a channel
plan without changing the [BAND BLOCK] or
[BAND] setting of the digital wireless receiver.
None: All usable channel plans can be assigned.
Receiver’s band block: Extract only the channel plan
matching the [BAND BLOCK] setting of the selected
receiver channel from among the usable channel plans.
Receiver’s band: Extract only the channel plan
matching the [BAND] setting of the selected receiver
channel from among the usable channel plans.
[Channel filtering] is supported in Wireless Studio
version 5.22 or later.
Automatic assignment
Click [Auto].
Starting with the lowest-frequency plans in the
channel plan list, the frequencies are automatically
assigned to the receiver’s receiver channels.
Individual assignment
Select a receiver channel from the receiver channel
list, and then select the frequency you want to assign
in the channel plan list.
Click the
T button to assign the frequency to the
receiver channel.
To cancel an assignment
Select the respective receiver channel in the receiver
channel list, and click the
t button to cancel the
assignment.
9
When you finish assignments for all the receiver
channels, click [Next >].
The frequency assignment settings are sent to the
receiver.
10
If necessary, enable or disable [Reflect recommended
GP/CH], and then click [Finish].
[Channel Plan Adviser] closes.
If the [Reflect recommended GP/CH] checkbox is
selected, only the groups and channels recommended
by [Channel Plan Adviser] will be selectable on
Wireless Studio. The groups and channels
recommended by [Channel Plan Adviser] will be
displayed in the [Spectrum Analyzer] tab of the sub
window. In addition, the receivers that will perform
scanning for the frequency band selected in step 2 will
be selected automatically in the [Scan parameter]
window.
Note
Note