Gilson 215 - Manual (Page 12)

1-4
Introduction
1
Unpacking
Standard Equipment
Once the liquid handler and the accessories
containers have been unpacked, you should have
the following:
Quad-Z 215 Liquid Handler
444 QuadDilutor with accessories
Locator plate with one drain base (includes four
mounting screws)
Rinse drain package which includes:
• 2-liter waste bottle
• Cap with quick connect fitting
• Rinse station with fittings
• 5 feet of Tygon waste tubing with quick connect
fitting
Z-arm and control cable with retaining clip and
level sensing cables
Accessory package which includes:
• Fuse drawers, fuses, and power cords
• 10-pin terminal block connector
• 8-pin terminal block connector
• 9/64" ball driver for removal of armlock
• Eight tubing retaining clips
• Cable support rod with bracket and two
Phillips-head attachment screws
• Tubing support rod
215 Utility Programs CD-ROM
444 Utility Programs CD-ROM
Quad-Z 215 Liquid Handler User’s Guide
444 QuadDilutor User’s Guide
Accessories
Based upon your configuration, you’ll also receive
additional accessories, such as the probes, transfer
tubing, racks, etc. If necessary, refer to Appendix A
for part numbers.