Gilson 215 - Manual (Page 28)

2-12
Installation
2
Rack Setup
Code 200-Series and Code 20-Series
or Code 30-Series Racks
To use a combination of Code 200-series and Code
20-series or Code 30-series racks on the locator
plate:
1 Install each Code 200-series rack as described
on page 2-11 .
2 For each Code 20-series or Code 30-series rack,
place an adapter plate onto the locator plate. Fit
the plate so that the slots on the adapter plate
align with the pins on the locator plate.
3 Place the Code 20-series or Code 30-series rack
onto the adapter plate.