Gilson 215 - Manual (Page 39)

2-23
Installation
2
Electrical Connections
Fuses
You received the liquid handler without any fuses
installed. To install the fuses:
1 Locate the accessory package containing the
fuse drawer appropriate for your line voltage.
Discard the other fuse drawer.
2 Locate the accessory package containing the
5.0A “T” Slo-Blo fuse (5 x 20 mm size) fuses.
3 Install the fuse(s) into the fuse drawer. The fuse
drawer for 100/120V accepts one fuse. The fuse
drawer for 220/240V accepts two fuses.
4 Insert the fuse drawer into its receptacle in the
liquid handler. See rear panel diagram on page
2-16 .
Fuse installation for 100/120 voltage
Fuse installation for 220/240 voltage