Rack setup, Code 200-series and code 500-series racks, Rack setup -11 – Gilson 215 User Manual
Page 27: Code 200-series and code 500-series racks -11
Advertising
2-11
Installation
2
Rack Setup
Rack Setup
The Quad-Z 215 Liquid Handler is equipped to
locate Code 20-, 30-, 200-, and 500-series racks. See
for a list of racks available for the liquid
handler.
Depending on the racks you’re using, refer to the
appropriate procedures on the following pages.
Code 200-Series and
Code 500-Series Racks
If all your racks are Code 200-series or Code 500-
series racks, place them directly onto the locator
plate:
1 Orient the rack so that the code number (for
example, 200) is facing forward.
2 Fit the rack on the locator plate so that the slots
and holes on the underside of the rack align
with the pins on the locator plate.
Advertising