Gilson 215 - Manual (Page 29)

2-13
Installation
2
Rack Setup
Only Code 20-Series or
Code 30-Series Racks
If all your racks are Code 20- or Code 30-series racks
and you do not have the optional 849 Multiple
Injection Module installed, follow the steps below.
1 Install the locator tray (part number 2504627,
ordered separately) onto the locator plate of the
liquid handler.
• For Code 20-series racks, the handles face
the front.
• For Code 30-series racks, the hose fittings
should face the back.
2 Position each rack onto the locator tray. You
can install up to seven racks using this tray.