Gilson 215 - Manual (Page 45)

3-5
Operation
3
Configuring the Liquid Handler
Configuring the Liquid Handler
The liquid handler comes from the factory with
its configuration set by Gilson. Configuration
information is stored in the non-volatile memory of
the liquid handler. Prior to using the liquid handler
for the first time, it is important to review and
adjust the default configuration to make sure it is
correct for your application.
The following pages describe how to use 215 Setup
Utility to configure the liquid handler. This
information is also available in the on-line help
supplied with the program.
When you execute the 215 Setup Utility from the
computer, the following tabs appear:
• about
• pump type
• syringe options
• rinse site
• liquid detector
• adjust XY
• Z height
• home phase
• safety contact
• bearing life
• sound & display
• emergency contact
Following is a description of each of the tabs.