Manitowoc Ice FLAKE/CHIPLET QF0400 - Manual (Page 20)

Installation Instructions Section 2
2-8 Part No. 80-1214-3
Remote Electrical Wiring Connections
RFC2085 REMOTE CONDENSING UNIT
208-230/1/60
RFC2385 REMOTE CONDENSING UNIT
208-230/1/60
!
Warning
These diagrams are not intended to show proper
wire routing, wire sizing, disconnects, etc., only the
correct wire connections.
All electrical work, including wire routing and
grounding, must conform to local, state and national
electrical codes.
Though wire nuts are shown in the drawings, the ice
machine field wiring connections may use either
wire nuts or screw terminals.
CONDENSING UNIT
CONNECTIONS
GROUND GROUND
TO FUSE/BREAKER.
DISCONNECT ALL
LINE VOLTAGE DO
NOT DISCONNECT
GROUND.
L
1
L
1
L
2
L
2
C
1
C
1
GROUND
GROUND
CONDENSING UNIT
CONNECTIONS
TO FUSE/BREAKER.
DISCONNECT ALL
LINE VOLTAGE DO
NOT DISCONNECT
GROUND.
C
2
C
2
L
1
L
1
ICE MACHINE
CONNECTIONS
L
2
L
2
Revised 8/2003